KATSU 850W Submersible Water Pump for Clean and Dirty Water for Garden Pond, Pools, and Ditches + Float Switch

Motor Power: 850W

Max Drift: 17500 L/H

Max Depth: 8M

Outlet: 2″, with reducers

IP Protection: IPX8

Weight: 6.8KG

Feature:

• Ideal for irrigating gardens in addition to pumping contaminated or muddy water from wells, tanks, cellars or basins.
• Fitted with an automatic go with the flow switch for water level keep an eye on. The go with the flow switch will turn the pump off when the water reaches a predetermined level to steer clear of damage to the pump.
• In case of permanent installation, it will be significant to check every 3 months that start mechanism is working properly (go with the flow switch or sensor).
• Regularly remove dirt that may accumulate in the sump.
• It is advisable that an RCD is all the time used with a submersible pump as will have to be the case whenever electrical products are used near water.

Your pump will have to not be used in following situations:
– Water temperature to be sucked > 35°C
– Continuous run (ex: fountain pump)
– Drinking water supply or washing machines for dishes supply.
– Corrosive, easily combustible, aggressive or explosive liquids (such as gasoline, petroleum or nitro thinner), saltwater, oils and greases will have to not be pumped.
– Permanent submersion under 3 meters or more water.

Ideal for irrigating gardens in addition to pumping contaminated or muddy water from wells, tanks, cellars or basins.
850W Motor with a maximum drainage Drift of 17500 L/h to easily empty water from ponds, pools, hot tubs, and other bodies of water up to 6m deep
Fitted with an automatic go with the flow switch for water level keep an eye on. The go with the flow switch will turn the pump off when the water reaches a predetermined level to steer clear of damage to the pump.
Stainless Steel Motor Housing