VEATON 400W Portable Submersible Pump for Dirty/Clean Water, Max Flow 8000L/H Electric Sump Pump, Automatic and Manual…

✔️【THERMAL PROTECTION】 Built-in motor thermal protection will automatically switch off the pump when it is overheating. It will switch on the pump after pump motor cool down.
✔️【AUTOMATIC FLOAT SWITCH】 Adjust float switch cable length to set pump automatic running by sensing the position of water level. Float switch is also can be disabled by attaching it on the side slot, then pump works manually control. The good thing is pump can drain water as low as possible by manually control(5cm).
✔️【POWERFUL AND STABLE PERFORMANCE】 400W, portable and energy-saving, Maximum flow rate 8000L/H and Max lift water up to 5m, this powerful pump offers stable performance for daily use and in emergencies.

£42.99

Buy product

Added to wishlistRemoved from wishlist 0

Add to compare

Category: Portable Flood Pumps

• Description
• Additional information

VEATON is a professional manufacturer of water pumps. We have been in pump industry more than 10 years and are capable to design, research, and produce different kinds of pumps with excellent quality! With the goal of creating user-friendly and energy saving products, we have well organized quality control and R&D department, which make our products more competitive and outstanding on the market. Buy with Confident!

Submersible Clean/Dirty Water Pump ‎

FSP4004DW

VEATON 400W submersible pump is ideal for draining pools, garden ponds, water tanks, hot tubs, flooded areas, basements, and other large bodies of water.

A Necessary Tool For Every House.

It’s designed for use in and out of the home, including irrigating gardens, powering water features, and removing unwanted water.

• Horsepower: 400 W
• Max Go with the flow rate: 8000 L/H
• Max delivery height: 5 m
• Max immersion height: 5 m
• Voltage: 230V/50Hz
• Max grain size: 25 mm
• Hose adapter: 1″, G1“, 1-1/4”, and G1.5″

<a href="javascript:void(0)" data-csa-c-func-deps="aui-da-a-expander-toggle" data-csa-c-type="widget" data-csa-interaction-events="click" aria-expanded="false" role="button" data-action="a-expander-toggle" class="a-declarative" data-a-expander-toggle="Flow Switch Automatically Start

• Minimum Water Level for Waft Switch Automatically Starts from 50cm.
• If the water level is not enough, you wish to have to hang up the Waft to the “ON” position and make it manually controlled. Just be careful to dry running with this mode.

Solid Passage

• The pump is designed also to work with dirty water.
• Its Maximum solid passage is 25 mm. So It is going to be suitable for mostly water conditions for your daily domestic application. Small sand, some muddy water, or particle all can pass through the pump.
• Don’t use the pump for any salt water, chemical or acid liquid, it may reduce the lifetime of pump!

Performance Data

• The maximum output with 1.5″ discharge port is 8000 L/H.
• We at all times suggest to use biggest discharge port and larger hose in order to have optimum performance！

<a href="javascript:void(0)" data-csa-c-func-deps="aui-da-a-expander-toggle" data-csa-c-type="widget" data-csa-interaction-events="click" aria-expanded="false" role="button" data-action="a-expander-toggle" class="a-declarative" data-a-expander-toggle="on account of dry running or impeller block, which will ensure effective pumping and longer lifetime.

Setting ON/OFF Operating Point

• The ON/OFF operating point of the pump can be readjusted by extending the cord of the Waft switch. The longest Waft cable gives you lowest water level.
• The distance between the Waft switch and the pump should not be too small since the switch should be able to move freely. Also make sure that the Waft switch does not touch the floor.

Read more

Tips:

1. The Waft switch can be disabled by attaching it on its side slot, so that the pump becomes manually control. With manual mode, pump can drain water as low as imaginable.
2. If you need the Go with the flow be bigger, the height of the water that you pump out should be lower, and using the 1.5inch discharge port.
3. The bigger the Go with the flow is, the wider the outlet should be.
4. Before starting, tilt the pump to remove all air and wait for 15 seconds.
5. If the water level is not enough height for Waft switch freely floating, you’ll be able to hook up the floater at “ON” position, pump can still work, which means manual operation, but just be sure you never let pump be dry running. Otherwise you risk motor to be burned.

	FSP400C	FSP550C	FSP4004DW	FSP750DW	FSP2502C	FSP350CR
Power	400 W	550 W	400 W	750 W	250 W	350 W
Max Go with the flow Rate	7000 L/H	11500 L/H	8000 L/H	13000 L/H	7500 L/H	4000 L/H
Max Delivery Head	7 m	9 m	5 m	8 m	5 m	12 m
Max Immersion Height	5 m	7 m	5 m	7 m	5 m	7 m
Discharge Size	1.5″	1.5″	1.5″	1.5″	1.25″	3/4″
Extra Adapter	1″, G1“, 1-1/4”, and G1.5″	1″, G1“, 1-1/4”, and G1.5″	1″, G1“, 1-1/4”, and G1.5″	1″, G1“, 1-1/4”, and G1.5″	1″, G1“, 1-1/4”	/
Used for	Clean Water	Clean Water	Dirty Water	Dirty Water	Dirty Water	Clean Water

✔️【THERMAL PROTECTION】 Built-in motor thermal protection will automatically switch off the pump when it is overheating. It is going to switch on the pump after pump motor cool down.
✔️【AUTOMATIC FLOAT SWITCH】 Adjust Waft switch cable length to set pump automatic running by sensing the position of water level. Waft switch is also can be disabled by attaching it on the side slot, then pump works manually control. The good thing is pump can drain water as low as imaginable by manually control(5cm).
✔️【POWERFUL AND STABLE PERFORMANCE】 400W, portable and energy-saving, Maximum Go with the flow rate 8000L/H and Max lift water up to 5m, this powerful pump offers stable performance for daily use and in emergencies.
✔️【SMALL DIRT PASSAGER】 For clean and dirty water, base filter design allows to pass up to 25mm solids and removes water down to 5cm.
✔️【EASY INSTALLATION】 Portable submersible pump with 8m cable, hose adapter, and instruction manual.